D13A | |
---|---|
Emission standard | Euro 3 |
No. of cylinders | 6 |
Displacement | 12.8 dm³ |
Stroke | 158 mm |
Bore | 131 mm |
Compression ratio | 18:1:1 |
Economy revs | 1050–1600 r/min |
Exhaust braking power | 170 kW (2300 r/min) |
VEB+ effect | 375 kW (2300 r/min) |
VEB+ | option |
Oil filters | 2 full-flow, 1 bypass |
Oil change volume, incl. filter | 33 l |
Cooling system, total volume | 38 l |
Sulphur free fuel (EN590, max 10 ppm sulphur)
Up to 100,000 km or once a year with VDS4.
Torque output | Ratio | |
---|---|---|
EPTT350 | 350 Nm* | 1.26:1 |
EPTT650 | 650 Nm* | 1.26:1 |
EPTT1000 | 1000 Nm* | 1.26:1 |
* Torque output both when driving and standing still.
Net output according to EC 582/2011
D13A400 (294 kW) | |
---|---|
Max power at 1400–1800 r/min | 400 hp |
Max torque at 1050–1400 r/min | 2000 Nm |
D13A440 (324 kW) | |
Max power at 1400–1800 r/min | 440 hp |
Max torque at 1050–1400 r/min | 2200 Nm |
D13A480 (353 kW) | |
Max power at 1400–1800 r/min | 480 hp |
Max torque at 1050–1400 r/min | 2400 Nm |
D13A520 (382 kW) | |
Max power at 1500–1800 r/min | 520 hp |
Max torque at 1050–1450 r/min | 2400 Nm |
12-speed splitter and range gearbox with an automated gear changing system. I-Shift can be fitted with a compact retarder, power take-off, emergency power steering pump and oil cooler.
Type | Top gear | Engine torque (Nm) | GCW approval (tonnes) |
---|---|---|---|
AT2412F |
Direct | 2400 | 44 |
AT2612F |
Direct | 2600 | 100 |
ATO2612F |
Overdrive | 2600 | 100 |
Type | Top gear | Engine torque (Nm) | GCW approval (tonnes) |
---|---|---|---|
SPO2812 | Overdrive | 2800 | 80 |
Basic version (TP-BAS)
TP-BAS is the standard software package supplied with the I-Shift and includes the gearbox’s basic functions for allround driving.
I-Shift distribution gear changing software (TP-DIST)
TP-DIST adapts the gearbox’s function to the specific conditions in the distribution segment. The software package includes functions that aid manoeuvrability when starting off from standstill, in manoeuvring and when driving at low speed.
I-Shift construction gear changing software (TP-CON)
TP-CON adapts the gearbox’s function to the specific conditions in the construction segment. The software package includes functions that aid manoeuvrability when starting off from standstill, in manoeuvring and when driving at low speed. This software can also handle tougher road conditions.
I-Shift long haul gear changing software (TP-LONG)
TP-LONG includes intelligent functions that minimise fuel consumption. This software package is ideal for long-haul operations where strong emphasis is placed on fuel economy. This package includes the I-Roll function.
Heavy duty transport (TP-HD)
TP-HD optimises I-Shift for heavy duty transport with high gross combination weights (>85 tonnes). Regardless of the gross combination weight, the driver can always optimise drivability by selecting or deactivating the heavy duty mode, and activating the long haul mode. The functions in the software package also offer benefits for trucks hauling multiple trailers.
Sales variants | TP-BAS | TP-DIST | TP-CON | TP-LONG | TP-HD** |
---|---|---|---|---|---|
Basic PTO Functions (APF-BAS) | ● | ● | ● | ● | ● |
Enhanced PTO Functions (APF-ENH) | o | o | o | o | o |
Basic Gear Selection Adjustment (AMSO-BAS) | ● | ● | ● | ● | ● |
Enhanced Gear Selection Adjustment, incl. Kickdown (AMSO-AUT) | – | – | o | o | o |
Basic Vocational Functions (AVO-BAS) | ● | ● | ● | ● | ● |
Enhanced Performance – Bad Roads (AVO-ENH) | – | o | ● | o | o |
Basic Shift Strategy | ● | ● | ● | ● | ● |
Performance Shift | ● | ● | ● | ● | ● |
Gearbox Oil Temperature Monitor | ● | ● | ● | ● | ● |
Heavy Start Engagement | ● | ● | ● | ● | ● |
I-Roll | – | – | – | ● | (•) |
Smart Cruise Control | – | – | – | ● | (•) |
Launch Control | – | ● | ● | ● | ● |
Enhanced Shift Strategy (GCW ≤ 85 t) | – | ● | ● | ● | ● |
Heavy Duty GCW Control (85 t < GCW ≤ 180 t) | – | – | – | – | ● |
Ultra low crawler gear* (ASO-ULC) | – | – | o | o | o |
Crawler gear* (ASO-C) | – | – | o | o | o |
Reverse multi-speed* (ARSO-MSR) | – | – | o | o | o |
I-See, use of GPS data | – | – | – | o | o |
• Standard (•) The function can be used when TP-LONG is activated. o Option – Not available
*Only AT2612F, ATO2612F, ATO3112F and ATO3512F. ARSO-MSR requires ASO-ULC or ASO-C.
**Only AT2612D, AT2612F, ATO2612F, ATO3112F and ATO3512F.
Type | Axle | Gear | Max torque (Nm) | Max axle/bogie load (tonnes) | GCW approval (tonnes) |
---|---|---|---|---|---|
Single reduction | |||||
RSS1144A | Solo | Hypoid | 2800 | 11.5/11.7 | 44 |
RSS1344C/D | Solo | Hypoid | 2600 | 13 | 44 |
RSS1356 | Solo | Hypoid | 2400/2800 | 13 | 56/44 |
RSS1360 | Solo | Hypoid | 3550 | 13 | 70 |
RTS2370A | Tandem | Hypoid | 3550 | 23 | 80 |
Hub reduction | |||||
RSH1370F | Solo | Conical spiral cut | 3550 | 13 | 70 |
RTH2610F | Tandem | Conical spiral cut | 3550 | 26 | 100 |
RTH3210F | Tandem | Conical spiral cut | 3550 | 32 | 100 |
RTH3312 | Tandem | Conical spiral cut | 3550 | 33 | 120 |
RSS1144A | RSS1344C/D | RSS1356 | RSS1360 | RTS2370A | RSH1370F | RTH2610F | RTH3210F | RTH3312 |
---|---|---|---|---|---|---|---|---|
2.31:1 | 2.31:1* | 2.50:1 | 2.47:1 | 2.43:1 | 3.46:1 | 3.33:1 | 3.33:1 | 3.61:1 |
2.47:1 | 2.47:1* | 2.79:1 | 2.64:1 | 2.57:1 | 3.61:1 | 3.46:1 | 3.46:1 | 3.76:1 |
2.64:1 | 2.64:1 | 3.10:1 | 2.85:1 | 2.83:1 | 3.76:1 | 3.61:1 | 3.61:1 | 4.12:1 |
2.85:1 | 2.85:1 | 3.44:1 | 3.08:1 | 3.09:1 | 4.12:1 | 3.76:1 | 3.76:1 | 4.55:1 |
3.08:1 | 3.08:1 | 3.67:1 | 3.40:1 | 3.40:1 | 4.55:1 | 3.97:1 | 3.97:1 | 5.41:1 |
3.36:1 | 3.67:1 | 3.78:1 | 5.41:1 | 4.12:1 | 4.12:1 | 6.18:1 | ||
3.70:1 | 4.11:1 | 4.13:1 | 4.55:1 | 4.55:1 | 7.21:1 | |||
4.50:1 | 5.41:1 | 5.41:1 | ||||||
5.14:1 | 6.18:1 | 6.18:1 | ||||||
5.67:1 | 7.21:1 | |||||||
6.17:1 |
* For RSS1344D
D13A400 | D13A440 | D13A480 | D13A520 | |
---|---|---|---|---|
I-Shift | ||||
AT2412F | ● | ● | ||
AT2612F | ● | ● | ● | ● |
ATO2612F | ● | ● | ● | ● |
Single reduction axles | ||||
RSS1144A | ● | ● | ● | ● |
RSS1344C/D | ● | ● | ● | ● |
RSS1356 | ● | ● | ● | ● |
RSS1360 | ● | ● | ● | ● |
RTS2370A | ● | ● | ● | ● |
Hub reduction axles | ||||
RSH1370F | ● | ● | ● | ● |
RTH2610F | ● | ● | ● | ● |
RTH3210F | ● | ● | ● | ● |
RTH3312 | ● | ● | ● | ● |
A wide range of clutch-independent and clutch-dependent power take-offs are available - to drive all sorts of body equipment.
PTER-DIN: Rear-mounted engine power take-off for direct drive of a hydraulic pump.
PTER1400: Rear-mounted engine power take-off with flange connection for hydraulic pump.
PTER-100: Rear-mounted engine power take-off with flange connection for hydraulic pump.
PTR-F: Connecting flange attachment and low-rev or high-rev.
PTR-FL/FH: Connecting flange attachment and low-rev or high-rev.
PTR-D/PTR-DM/PTR-DH: Low/medium/high-rev with DIN-connection for direct attachment of a hydraulic pump.
PTRD-F: High-rev with connecting flange attachment for direct-fitted propshaft.
PTRD-D: High-rev with dual drive. DIN connection front and rear for direct attachment of hydraulic pumps.
PTRD-D1: High-rev with dual drive. Connecting flange attachment at the rear and DIN attachment at the front.
PTRD-D2: High-rev with dual drive rear and single drive front. Two connecting flange attachments rear and one DIN attachment at the front.